Dish Pro Plus DP44 4 X 4 Multi Switch for Bell or Dishnet
SWEC0044
We currently have 16 in stock.
Details
The DISH Pro Plus 44 Switch features DISH Pro Plus Technology, LNBF inputs supporting four orbital locations, four receiver outputs, expansion ports to connect additional switches, and a power inserter.
DISH Pro Plus-compatible dual-tuner receivers (942, 625, 921,721,522 and 322) can be connected with a single-cable, when used with a DISH Pro Plus Separator.
Provides four LNBF inputs for reception from up to four locations.
Three "trunk" connections, to "trunk" to another DP44 Switch.
Requires power insertion, power supply included
Special Considerations
Can only be used with DishPro or DPPlus LNBFs (Twin LNBF for two orbital locations (110° and 119°),
Legacy Receivers
A "legacy" receiver (non-DishPro receivers, released before Dish301) can be connected to a DishPro DPP44 Switch, without using a DishPro Adapter. The DPP44 switch has built-in DISH Pro Adaptor which will allow this switch to be used with any DISH Network receiver including older legacy equipment
DP Plus 44 Switch Features
Four inputs for use with up to four orbital locations.
Four outputs for connection to up to four tuner inputs.
Four "trunk" connections, to "trunk" to another DP Plus 44 Switch.
DOES require power insertion.
Can be used indoors or outdoors.
Special Considerations
Up to four single-tuner DISH Pro receivers.
Up to two dual-tuner receivers
Up to four DISH Pro Plus receivers when each is used with a DP Plus Seperator
Legacy Receivers
Legacy receivers do not need a DISH Pro Adapter.
2800, 3900, 4900, and 6000 will view the switch as an "SW-21 4Sat" with up to four satellite locations.
1000, 2000, 3000, 4000, 5000, 71/7200, and JVC IRR will view the switch as an SW-64 with up to three satellite locations.
DISH Pro Plus-compatible dual-tuner receivers (942, 625, 921,721,522 and 322) can be connected with a single-cable, when used with a DISH Pro Plus Separator.
Provides four LNBF inputs for reception from up to four locations.
Three "trunk" connections, to "trunk" to another DP44 Switch.
Requires power insertion, power supply included
Special Considerations
Can only be used with DishPro or DPPlus LNBFs (Twin LNBF for two orbital locations (110° and 119°),
Legacy Receivers
A "legacy" receiver (non-DishPro receivers, released before Dish301) can be connected to a DishPro DPP44 Switch, without using a DishPro Adapter. The DPP44 switch has built-in DISH Pro Adaptor which will allow this switch to be used with any DISH Network receiver including older legacy equipment
DP Plus 44 Switch Features
Four inputs for use with up to four orbital locations.
Four outputs for connection to up to four tuner inputs.
Four "trunk" connections, to "trunk" to another DP Plus 44 Switch.
DOES require power insertion.
Can be used indoors or outdoors.
Special Considerations
Up to four single-tuner DISH Pro receivers.
Up to two dual-tuner receivers
Up to four DISH Pro Plus receivers when each is used with a DP Plus Seperator
Legacy Receivers
Legacy receivers do not need a DISH Pro Adapter.
2800, 3900, 4900, and 6000 will view the switch as an "SW-21 4Sat" with up to four satellite locations.
1000, 2000, 3000, 4000, 5000, 71/7200, and JVC IRR will view the switch as an SW-64 with up to three satellite locations.
